AIThis post was created with the assistance of artificial intelligence (AI).

TL;DR

Before you orderOffer from Amazon

Get furniture and decor delivered free with Prime

  • Fast, free delivery on millions of items
  • Prime Video, Amazon Music and more included
  • Member-only deals all year
Start your free Prime trial Free trial for eligible customers · Cancel anytime
As an affiliate, we earn on qualifying purchases.

A Hunker report describes how to turn two half-gallon milk jugs into a two-compartment countertop holder using cardboard, popsicle sticks and jute twine. The project was demonstrated by YouTuber Minno creation; the report says one-gallon jugs may work better for longer utensils than for cutlery.

Hunker has reported on a DIY countertop storage project that turns two empty half-gallon milk jugs into a decorated, two-compartment holder for cutlery. Demonstrated in a video by YouTuber Minno creation, the craft uses jugs, cardboard, popsicle sticks and jute twine, offering a way to reuse household packaging rather than buy a countertop organizer.

The project starts with two half-gallon milk jugs. The bottoms are cut off, leaving a vertical tab, and the jug sections are joined side by side with hot glue to form a container with two compartments. A piece of cardboard glued to the bottom adds support, according to Hunker’s description of the video.

The outside is covered with popsicle sticks and jute twine, attached with hot glue. The report says the maker also cut the plastic handle in selected places to make the holder easier to carry, then added a floral design to one side. The finished piece was presented as a rustic-style cutlery holder.

Materials listed in the report include scissors, a box cutter, a hot-glue gun and glue sticks, as well as the jugs, cardboard, craft sticks and twine. The project description does not provide exact measurements, a materials cost, or a time estimate. Hunker says the build uses a substantial amount of glue and craft sticks, so the required supplies may vary with the size and finish chosen.

At a glance
reportWhen: Reported by Hunker; the source does not…
The developmentHunker reported on a DIY project that repurposes half-gallon milk jugs as a decorated countertop cutlery holder.

A Second Use for Empty Jugs

The project pairs household reuse with countertop organization. For people who already have the listed craft supplies, adapting discarded containers may offer an alternative to purchasing a holder. But the source provides no cost comparison or evidence that the finished project is cheaper than store-bought storage; savings depend on what materials are already available and what must be bought.

The design also shows a practical limit to upcycling: a container’s size and shape affect what it can hold. The reported version is intended for cutlery, while larger jugs may suit longer utensils better. Readers should treat the project as a craft demonstration, not as a tested product with published durability or food-safety findings.

Products Worth Considering

As an affiliate, we earn on qualifying purchases.

The Half-Gallon Design

Hunker’s report focuses on a video by Minno creation, rather than an independently tested storage product. The design joins two cut-down jugs, reinforces their base with cardboard and hides much of the plastic surface beneath craft materials. Its finished appearance depends on the sticks, twine and decorative details added by the maker.

Hunker notes that a one-gallon jug could be used, but says the half-gallon size is preferable for this particular cutlery-holder design. A gallon jug’s wider base may be too broad for spoons, forks and knives, which could settle low in the container. The report suggests that a larger version could instead hold longer tools such as spatulas, ladles and whisks.

For that larger build, the report recommends jumbo craft sticks to better match the scale and reduce the number of pieces to attach. That is guidance from the article, not a tested comparison of different stick sizes. The overall project remains a hands-on craft that requires cutting plastic and working with hot glue.

“The ½-gallon ones used by Minno creation are preferred.”

— Hunker

Costs and Durability Remain Unknown

The report does not state how long the holder takes to make, how much glue or twine is needed, or what the finished project costs. It also does not report testing of the holder’s durability, stability or resistance to wear. The article’s materials list and steps are a summary of the video, not a full set of measured instructions.

It is also unclear how the holder performs when used around kitchen items over time, or whether its materials are suitable for direct contact with food. The article presents it as a countertop organizer, but does not provide food-contact guidance. Anyone trying the craft would need to decide how to use it and whether its construction suits that purpose.

Choose a Size Before Cutting

Anyone following the idea should first decide whether the holder is meant for cutlery or longer utensils. For the reported cutlery design, half-gallon jugs are the recommended starting point; a one-gallon version may be more appropriate for spatulas, whisks and ladles. The larger option may call for jumbo craft sticks and more finishing materials.

Before building, gather the materials and allow for the project’s repeated gluing steps. Cutting the jugs requires care with scissors or a box cutter, and hot glue can cause burns; use tools cautiously and follow their safety instructions. The source does not identify a next publication or further test of the design, so its long-term performance remains unreported.

Key Questions

What does the DIY project make?

It makes a two-compartment countertop holder, presented in Hunker’s report as a cutlery organizer.

What materials are used?

The described build uses two half-gallon milk jugs, cardboard, popsicle sticks, jute twine and hot glue. Scissors and a box cutter are also listed for cutting the materials.

Can one-gallon milk jugs be used?

Hunker says they can be used, but their wider bases may be unsuitable for cutlery. The report suggests they may work better for longer tools such as spatulas, ladles and whisks.

Is the finished holder proven to be durable or food-safe?

The report does not provide durability testing or food-contact guidance. It describes the item as a countertop organizer but does not establish how it performs over time or whether it is suitable for direct food contact.

Source: hunker.com

You May Also Like

Crafting Custom Roman Shades With Patterned Fabric

Master the art of crafting custom Roman shades with patterned fabric to transform your space—discover the essential steps and tips to achieve a professional finish.

Why Faux Built-Ins Appeal to So Many Homeowners

Loving the look of custom storage, many homeowners turn to faux built-ins for an affordable, versatile upgrade that transforms their space—discover how they do it.

I Used To Renovate For Style — Then Something Major Changed My Approach

A professional renovator reveals how a major change in perspective transformed their renovation style, emphasizing accessibility over aesthetics.

Her Paint DIY Completely Redid the Unfunctional Bathroom — It Looks Like Wallpaper

A DIYer transformed her dysfunctional bathroom into a stylish space resembling wallpaper using paint and simple hacks, all for around $900.